Q Why is the service life of standard parts of equipment short?
A For example, for cylinders and motors, such standard parts need to be first selected from international brands, and their accuracy and after-sales service are guaranteed. If brand products have been selected and damage still occurs frequently, it is necessary to consider whether the structure of the equipment mechanism needs to be improved.
Q What are the common failures of automation equipment?
A
1. First, the sensor position of the automation equipment will give an offset alarm.
2. The connection of electrical, pneumatic and hydraulic circuits may be defective. Check all power, air and hydraulic sources of automatic machinery
Q What are the common material loading methods?
A In the automation industry, the feeding method is the first choice for equipment operation. Among them, vibrating disk feeding is the most common and the most common. The remaining common ones are rotary table lifting feeding, clip on feeding and flexible feeding. Cylinder jacking feeding is widely used in shafts.
Q How to realize the automatic soldering process and how to ensure the solder quality of products?
A First, the quality of the solder material is ensured, then the solder is dipped with flux, and then the solder temperature needs to reach the process temperature of different products. Then, the oxide layer on the surface of the solder pool needs to be scraped off with a scraper, and the solder is dipped within the effective time.
Qingdao Chuancheng Precision Electromechanical Co., Ltd is a private enterprise specialized in supporting automatic chemical plants.
